What Products Can Be Tested?
Depending on its facilities, an automotive laboratory can test fasteners, suspension parts, seat structures, interior materials, lamps, wiring, connectors, sensors and electronic control units.
Some laboratories focus on materials or mechanical components, while other laboratories specialise in testing or vehicle electronics. The testing plan should reflect the component’s function, installation location and intended operating conditions.
Common Types of Automotive Product Testing
Material and Mechanical Strength Testing
Materials need properties that fit their purpose. Laboratories may measure tensile strength, hardness, impact resistance or how they behave when compressed or bent.
Component tests can assess stiffness, attachment strength or resistance to specified loads. For example a seat structure and a small electrical connector need different fixtures, forces and acceptance criteria.
Fatigue and Durability Testing
A component may withstand a heavy load but develop damage after repeated loading. Fatigue testing examines this behaviour by applying controlled load cycles.
Durability testing may also involve operating mechanisms such as door latches, seat adjusters or hinges. Engineers monitor changes, in operation, deformation, wear or failure to understand how the design responds to the agreed test conditions.
Environmental Testing
I have noticed that vehicle parts face environments depending on where they are installed. A component near an engine experiences conditions that're very different from those inside a panel in the passenger cabin.
Assessments may include temperature cycling, humidity, vibration, mechanical shock or exposure to specified fluids. When it comes to vehicle electronic equipment the ISO 16750 series is the standard that addresses environmental conditions and testing. The ISO 16750 series also carefully considers the component’s mounting location.
Corrosion and Coating Assessment
Metal parts and protective coatings can be evaluated with controlled corrosion tests. Salt spray testing is a method I frequently see used to examine corrosion resistance and to spot coating defects.
ISO 9227 specifies the procedures, for salt spray testing. The exposure period and the way results are interpreted must come from the product specification. ISO 9227 does not provide an universal acceptance limit for every automotive part.
Electrical and Electromagnetic Compatibility Testing
Electronic components may need checks that cover operation and how they respond to disturbances. Electromagnetic compatibility or EMC testing looks at electromagnetic emissions and how well the component can handle specific disturbances. CISPR 25 deals with emissions that could interfere with on-board radio receivers. The ISO 11452 series covers tests for component immunity to radiated fields.
How Is a Testing Programme Developed?
The laboratory looks at the product its drawings, material details operating conditions and the goals of testing. Applicable standards and vehicle manufacturer rules help decide the testing methods how many samples are needed what loads to apply exposure conditions and what results are acceptable.
Engineers write down measurements, observations and any failures in a report. When a problem is found the manufacturer can look into whether it's due to design, materials, the manufacturing process or something else. Then they can plan retesting to verify improvements.
Automotive product testing evaluates vehicle components for mechanical strength, fatigue, durability, environmental resistance, corrosion protection and electromagnetic compatibility. These assessments help manufacturers identify potential defects, improve component reliability, enhance product safety and verify compliance with applicable automotive standards.

Comments
Post a Comment